10 Best End Fed Antenna of 2021

10 Best end fed antenna: Editor Recommended

10 Best End Fed Antenna Reviews in 2021

Bestseller No. 1
Portable No Tune End Fed Half Wave Antenna Assembly
  • The single-band 80m-10m end-feed half-wave linear antenna provides the antenna. It is designed as a highly portable wired antenna that can be easily set as an inverted V-shaped, horizontal, tilted, or vertical radiator (at higher frequencies).
  • Your feeder is inherently balanced, so no separate feeder is required. The high-impedance half-wave line is matched to your 50-ohm feed point through an integrated impedance-matching toroidal transformer with a rated power of 10 watts.
  • Use a high-voltage capacitor on the primary of the transformer with a specific radiator length to further expand and reduce the SWR within the range of 80m-10m.
  • It is designed to be used without the use of a tuner, and after optimizing the driven element, SWR ≤ 1.2 for any part of the frequency band.
  • Package Included: 1 x Portable No Tune End Fed Half Wave Antenna
SaleBestseller No. 2
MFJ-1984HP EndFed 1/2 Wave 800W 40M-10M Wire Antenna
  • 800W, high power, 40-10 Meters, 66 feet.
  • FULL HF Coverage, no tuner needed on most frequencies
  • Rugged weather-resistant 50-Ohm matching network
  • No long counterpoise, radials or feedline required
  • Stainless Hardware, UV resistant materials throughout
Bestseller No. 3
MFJ-1984LP EndFed 1/2 Wave 30W 40M-10M Wire Antenna
  • 30 Watts QRP, 40-10 Meters, 66 feet.
  • FULL HF Coverage, no tuner needed on most frequencies.
  • Rugged weather-resistant 50-Ohm matching network
  • No long counterpoise, radials or feedline required
  • Stainless Hardware, UV resistant materials throughout
Bestseller No. 4
Portable End-Fed / 80-6 Meters/Dipole Antenna/ 300 watts
  • 300 watts
  • Poly-Stealth 18 wire
  • Unun wound with #20 tinned PTFE wire
Bestseller No. 5
W5SWL Brand 2-1/2" Dipole Pulley Ham QRP Antenna Inverted Vee Loop...
  • Antenna Support Pulley
  • 2-1/2" nylon sheave (wheel)
  • Heavy Duty plastic straps
  • Approximately 3/8" support hole
SaleBestseller No. 6
Amagogo 1:49 balun 100W Short Wave Balun HAM HF Antenna 5-35MHz End...
  • Standing wave: 1.5
  • Suitable for HAM with certain hands-on ability.
  • It only needs to be equipped with a vibrator of 20 meters in length, which can naturally resonate in the four amateur bands of 7, 14, 21, and 28, and the influence of the height-changing resonance point is very small.
  • This is a 49:1 balun for the end-feeding antenna.
  • Frequency: 5-35MHZ
Bestseller No. 7
W5SWL Brand 4" Dipole Pulley Ham Radio Antenna Inverted Vee Loop...
  • Antenna Support Pulley
  • 4" nylon sheave (wheel)
  • Heavy Duty plastic straps
  • Approximately 3/8" support hole
Bestseller No. 8
EFH20 End Fed Half Wave Antenna (20M)
  • EFH20 End Fed Half Wave Antenna (20M)
  • EFH20
Bestseller No. 9
W5SWL Brand 1-3/4" Dipole Pulley Ham Radio Antenna Inverted Vee Loop...
  • 1-3/4" fiberglass reinforced nylon sheave (wheel) - Red in color - Pulley Only
  • Heavy Duty zinc plated steel straps
  • Composite wheels will not corrode
  • Self lubing
  • Sheave (wheel) has strong edge and deep groove
Bestseller No. 10
W5SWL Brand 1-1/4" Metal Dipole Pulley Ham Radio Antenna Inverted Vee...
  • 1-1/4" metal sheave (wheel)
  • Heavy Duty Fixed Eye Support
  • Approximately 3/8 support hole
  • Metal
  • Sheave (wheel) has strong edge and deep groove
Related Post

Leave a Comment