10 Best Figure 8 Descender of 2021

10 Best figure 8 descender: Editor Recommended

10 Best Figure 8 Descender Reviews in 2021

Bestseller No. 1
YXGOOD 50KN Rescue Figure, 8 Descender Large Bent-Ear Belaying and...
  • Product size and weight: length 6.7 inches, width 6.7 inches, upper hole length 2.17 inches, middle hole length 1.26 inches, lower hole length 1.54 inches, weight about 10 ounces
  • Product material: the product is made of aluminum magnesium alloy by hot forging. It has the advantages of high strength, light weight and easy to carry
  • Special design: the middle section of the 8-shaped ring is thickened, the thickness is greater than both ends, which can enhance the wear resistance and reduce the overall weight
  • Excellent braking resistance: breaking strength 11000 LBF (50kN / 5000kg), allowing smooth rope movement to drop or ensure, providing excellent control rope
  • Scope of application: applicable to rapid descent, expansion, exploratory hole, power rescue and aerial work, etc
Bestseller No. 2
AOKWIT 50KN Rescue Figure, 8 Descender Large Bent-Ear Belaying and...
  • Keep Your Safety: It uses the friction between the rope and the Descender device to slow down the descent or brake. Extra thick with ears and belay slot will keep your safety, even in a rescue or emergency situation.
  • Superior Braking Resistance: Breaking strength 11,000 lbf (50KN/5000kg). Allows for smooth rope action while descending or belaying, offers superb control on rope.
  • Figure 8 Descender: Big Wall Climbings Terminal 8 with Ears is an improvement over standard figure 8 devices with improved breaking and safety features.
  • EASY LOCK-OFF: With bent-ear, locking yourself off with both hands free will be much easier and safer.
  • It Applies To: Suitable for Mountain Climbing, Rock Climbing, Ice Climbing, Rescue, Working-At-Height, Technical Rope Rescue, Climbers, Cavers and Sport Rappelers
Bestseller No. 3
Azarxis Climbing Rescue Figure 8 Descender Rigging Plate Heavy Duty &...
  • 🎈 MATERIAL: The figure 8 descender is made of A7075 Aviation Aluminum Alloy, which is durable, lightweight, sturdy and high strength
  • 🎈 PRODUCT INFORMATION: Size: 5.75 × 2.95 inch / 14.6 × 7.5 cm; Weight: 120 g / piece; Maximum Tension: 35KN / 3500 kg
  • 🎈 APPLICABLE ROPE: Rope Diameter: 0.31-0.51inch / 8-13mm; The Super 8 Downhill Equipment is an anodized, lightweight and full-size Figure 8 Rappel Gear, which can minimize reduce friction and work very well when rappelling
  • 🎈 USAGE CONDITIONS: The rigging plate is mainly used for Working-At-Height, Cavers, Technical Rope Rescue, Climbers and Sports Rappelers. The Rappel 8 is compact in design and provides excellent control on smaller ropes
  • 🎈 APPLICATIONS SCENARIO: Ideal for Rock Climbing, Canyoning, Hiking, Tree Felling, Caving, Sailing, Engineering Works, Outdoor Training, Rescue, High-Altitude Operations, Aviation Games, Adventure, etc
Bestseller No. 4
CdyBox 35KN Figure 8 Descender Rope Rappel Belay Device for Mountain...
  • Belaying and rappelling
  • Light Weight and Strong
  • Material: Aluminium and Magnesium alloy forging.
  • The Super 8 is an anodized, super-light and full-size figure 8 that works extremely well when rappelling.
  • Its traditional shape allows the rope to smoothly flow with the perfect amount of friction for the task.
Bestseller No. 5
Epic Peak Large Figure 8 Belay Device Descender for Climbing with Free...
  • Belaying and Rappeling Device
  • 30KN
  • Light Weight And Strong
  • Anodized Eco-Friendly Low Acid Paint
  • Weight 140g - Aluminum Alloy
Bestseller No. 6
TRIWONDER 35KN Aluminum Climb Figure 8 Descender Rigging Plate Rappel...
  • ✅【MATERIAL】A7075 Aviation aluminum alloy, the figure 8 descender is excellent in lightness and high strength
  • ✅【SPECIFICATIONS】Size: 14.6 * 7.5 cm Weight: 120 g Maximum tension: 3500 kg
  • ✅【CORRESPONDING ROPE】8-13 mm. Surface anodization to maximize reducing rubbing between the rope and the figure 8 belay device, preventing damage to rope and protect fingers from burns
  • ✅【USAGE CONDITIONS】The rigging plate is mainly used for working-at-height, technical rope rescue, climbers, cavers and sport rappeller
  • ✅【APPLICATIONS】Suitable for rock climbing, mountain climbing, caving, tree felling, sailing, window cleaning, aviation games, rescue, raid, engineering protection, aerial work, etc
Bestseller No. 7
CyberDyer 35KN Figure 8 Descender, Rescue Figure 8 Rappelling Gear...
  • HEAVY DUTY & SAFETY ASSURANCE - Made of 7075 Aircraft-grade Aluminum Alloy, CyberDyer figure 8 descender has sturdy design with two big belay loops to create sufficient friction between the rope and the descender device to slow down the descent or brake...
  • SUPERIOR BRAKING RESISTANCE & FROSTED SURFACE - Tensile strength 7716 lbf (35KN/3500kg). Due to frosted surface design, it helps the rappelling descender increase enough friction, which features superb rope control to handle the heavy loads while belaying...
  • HANDS FREELY & DECREASE HEAT - With two big belay loops, CyberDyer figure 8 descender allows you to tie off your rope and use both your hands freely. Due to the outstanding design, it can decrease the heat of descender to reduce the rope wear and tear,...
  • GREAT CLIMBING MATE - Use CyberDyer rope descender together with your climbing harness and locking carabiner to help you slow down the speed of your descent when rappelling.
  • VERSATILE USE - Due to wide enough loops, CyberDyer rescue 8 descender can work with almost all kinds of climbing ropes. It can be used for rock climbing, mountain climbing, belaying, sport rappelling, cave exploration, working-at-height, rescue...
Bestseller No. 8
PETZL D02 HUIT Figure 8 Descender
  • Square shape helps reduce rope twist and girth hitch formation
  • Compact and lightweight
  • High strength forged
  • Material: Aluminium
Bestseller No. 9
ProClimb Rescue Figure 8 Descender - Stainless Steel Belay Device...
  • CLIMB WITH CONFIDENCE - Made with Anodized Stainless Steel. Maximum breaking strength: 50 KN / 11240 lbs. Weight: 26 oz / 737 g. Rope Sizes: 11 mm - 16 mm.
  • EASY TO USE - Rigging plate for smooth and superb rope control while descending or belaying with easy lock-off, adjustable descent rate, and large main slot.
  • MULTIPURPOSE - Perfect for arborists, tree climbing, mountain climbing, rock climbing, ice climbing, rescue, rappelling and many more.
  • BUILT TO LAST - Industry-leading quality. Durable, lightweight, and strong. Apply large friction to rope with ease for climbing, rappelling, rigging an aerial silk and help control rope sliding speed.
  • LABORATORY TESTED - 100% factory and proof tested for durability and versatility from independent laboratories such as UL to certify.
Bestseller No. 10
XINDA Rescue Figure 8 Descender - 50kN Large Bent-Ear Climbing...
  • XINDA rescue figure 8 descender with bent-ears is an improvement over standard figure 8 devices. As a versatile rappel device, widely used for rescue, training, mountaineering, caving ,working-at-height, aerial silk etc.
  • Bent-Ear Design! The middle section of the 8-shaped ring is thickened,the thickness is greater than both ends, largely decreases the abrasion or wear of rope to a minimum level.Breaking strength: 50KN(11,000 lbs).
  • Easy Lock-off! With bent-ear, locking yourself off with both hands free will be much easier and safer.
  • Specification: Length: 6.69”, Width: 6.69”, upper hole length: 2.16”, middle hole length: 1.25”, lower hole length 1.57”, Thickness: 0.66”; Weight: 280g (9.87 oz).
  • What You Get: 1 pcs XINDA figure 8 descender. 30 days no reason to return, 90-days money back policy for quality-related issues give you 100% satisfaction,please buy without worry.
Related Post

Leave a Comment