10 Best Filament Runout Sensor of 2021

10 Best filament runout sensor: Editor Recommended

10 Best Filament Runout Sensor Reviews in 2021

Bestseller No. 1
BIQU Filament Break Detection Sensor Module 3D Printer Accessories...
  • 🌷【Function of Filament Detection Module】To detect Filament in 3D printer run-out,pause detection, it automatically stops the 3D Printer when the filament runs out.Optimize the inlet port/outlet port of the material detection module, to reduce the...
  • 🌷 【Filament Break Detection Module 】When there is material, the level signal of the detection port should be high level. When there is no material, the level signal of the material port goes low, and the system detects one. If the high-to-low...
  • 🌷 【 Detection Method】The material detection module uses the level jump detection method.
  • 🌷【Filament Size】It Suitable for 1.75mm Filament with 1m cable which making your printing work goes smooth and relieved.
  • 🌷 【After-Sales Guarantee】We support high quality after-sales Service,any questions or feedback please contact us,no matter what refund or resend. We will satisfy with your request.
Bestseller No. 2
Original Creality Ender 3 V2 Filament Runout Sensor Smart Filament...
  • Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer...
  • Independent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique; Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction,...
  • Precise Detection: Blue LED indicates normal filament feed-in; Blue LED turns off when filament runs out.
  • IMPORTANT: For Ender 3 V2, Ender 3 and Ender 3 pro, you need to flash your motherboard's firmware before using, about the firmware download way, please check the following description or the instrument in the pack. as Ender 6 and CR10S PRO printer's...
  • Package: 1 filament detector sensor, 1 extended cable, 1 installation bracket(This bracket is only used for Ender 3 / V2 / Pro, Filament detection bracket or holes already set up in the Ender 6 and CR10S PRO)
Bestseller No. 3
BIGTREETECH Direct Upgrade SFS Smart Filament Sensor 1.75mm PLA...
  • ✓1.【Inspection of Consumables Diameter】: 1.75mm
  • ✓2.【Detection length of consumables】: 7mm
  • ✓3.【Firmware】: marlin. 2.0.X
  • ✓4.【Module size】:75mm X 30mm X 29.55mm
  • ✓5.【For more information】: Please search BIGTREETECH at GitHub
Bestseller No. 4
Creativity 3D Printer Filament Detection Sensor Module Filament...
  • ★【3D Printer Accessories】Very practical filament detection sensor module, ideal accessories for 3D printer, making your printing work smooth and relieved.
  • ★【Main Function】For checking the filament is whether run out or not, it automatically stops the 3D Printer when the filament runs out.
  • ★【Filament Detection Module】Newly designed smart module, The main board executes the pause command operation when the filament is run out.
  • ★【Extended Product Life】A wear-resistant copper sleeve is added to the feed port and the discharge port at the same time can effectively prolong the service life of the product.
  • ★【After-sales Guarantee 】Each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.
Bestseller No. 5
BIGTREETECH 3D Printer Part Smart Filament Sensor Break Detection...
  • ❤【Break Detection Function】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure...
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of...
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament.
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/MKS GEN L control board.
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer.
Bestseller No. 6
BIGTREETECH Smart Filament Sensor Filament Break Detection Module 3D...
  • 1) It can detect nozzle plugs, consumables are entangled, and the consumables caused by extruder failure are abnormally extruded. Happening.
  • 2) It can detect that the consumables such as consumables are broken and the consumables are not used.
  • 3) Applies to the open source firmware marlin 2.0.x. Marlin2.0 uses powerful development tools, Visual Studio Code integrated development environment: support for online debugging, more helpful for product development and performance optimization, C...
  • 4) Support the motherboard with the break detection interface.
  • 5) Support screen 2004, 12864, TFT24 (12864 mode), TFT35_V3.0 (12864 mode).
Bestseller No. 7
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting...
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With...
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the...
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the...
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system...
Bestseller No. 8
TriangleLab Filament Runout Sensor Detector for 3D Printer 1.75mm...
  • This filament runout sensor is designed for detect whether your filament is run out during the printing process.
  • The sensor will send the signal to the printer when the filament is run out and printer will pause the print job until the new filament is loaded when the printer w/ correct firmware and setting.
  • 1pc Runout Sensor, 1pc 3pin Cable, 3pc Cable Connectors, 2pcs Screws w/ nuts, 1pc PTFE Tube
Bestseller No. 9
Bilway Creality Printer Filament Runout Sensor Smart Break Detection...
  • This 1.75mm filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the...
  • This Filament breakage sensor save your filaments when a strike occures. Its cover is made from Aluminum material, red surface treatment, looks beautiful.
  • Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments
  • Precise Detection: Blue LED indicates normal filament feed-in; Blue LED turns off when filament runs out.
  • Original from Creality, can be used without any adjustment for Creality CR-10 V3 / SV03 / CR-10 V2/ CR-10S Pro /CR-10S Pro V2 / CR-10 Max /Ender-3 Max / Ender-6 /CR-3040 Pro /CR-5Pro 3D Printer
Bestseller No. 10
CREALITY CR6 SE Filament Runout Sensor Detection Module Pause...
  • Independent Modularized Design, Compatible with CR-6 SE, CR-6 MAX, CR-10 Smart, CR30, Sermoon D1 and 3DPrintMill 3D Printer, but not stuiable for CR10, CR10 S4 and S5, please know before ordering.
  • Smooth filament travelling: The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.
  • Precise Detection: Blue LED indicates normal filament feed-in. Blue LED turns off when filament runs out.
  • It is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
  • Size: 40x31x18mm, used for 1.75mm diameter filament.
Related Post

Leave a Comment